POLAR ACM 650
Automatic chamfering machine for HSS and segmental circular saw blades
The POLAR ACM 650 machine is controlled by PLC, it can also be programmed and used by a non-skilled operator, the setting of the machine is made using push-buttons on the control panel, and simple and precise mechanical adjustments, with sequential operations.
For the chamfering of teeth form AW, BW, C, of HSS and segmental circular saw blades.
Fully automatic, machining is completed in one revolution of the circular saw, with automatic disconnection at the end of the working cycle.
The working speed is extremely high, it is possible to chamfer up to 70 teeth per minute.
The mechanical dressing device guarantees the perfect grinding wheel geometry, to obtain the correct chamfering of the tooth.
TEETH:
PLC controlled machine
Chamfering of tooth form AW, BW, C, completed in a single pass (one revolution of the circular saw blade)
Optimum time utilization in the operating cycle: rapid movement of grinding head into position giving way to slow grinding stroke
High working speed
Free set-up of clearance angle
Mechanical dressing device for grinding wheel, with manual control
Short machine set-up times and very easy to use
Very low air consumption
| Diametro sega circolare | mm 120-650 |
| Passo massimo dente forma AW, BW | mm 35 |
| Passo massimo dente forma forma C | mm 25 |
| Spessore massimo sega circolare | mm 8 |
| Diametro mola | mm 150 |
| Velocità di lavoro | denti/min 40-70 |
| Velocità mola | giri/min 3500 |
| Pressione aria | bar 6 |
| Consumo d'aria | litri/min 10 |
| Potenza installata | kVA 1,7 |
| Peso netto | kg 267 |
Coming soon
Coming soon
Coolant system